Could you design a Verilog-based router circuit with an input signal and multiple outputs, controlled by a two-bit address signal?

Design Verification Engineer

Microsoft

Alstom

Honeywell

Intel

Philips

Dell

  • Can you create a Verilog circuit that routes an input signal to one of four outputs, based on a two-bit address, with an enable control?
  • Can you develop a Verilog circuit to route an input to one of four outputs, controlled by a two-bit address and an enable function?
  • Can you devise a Verilog routing circuit with multiple outputs, driven by a two-bit address and an enable control?
  • Could you design a Verilog-based router circuit with an input signal and multiple outputs, controlled by a two-bit address signal?
  • Could you formulate a Verilog routing circuit with one input, four outputs, a two-bit address selector, and an enable signal?
  • Design a circuit that functions as a router with multiple outputs, taking an input signal (din) and forwarding it to one of four output signals (dout0, dout1, dout2, or dout3) based on the value of a two-bit input signal (addr). Each output signal should correspond to a specific decimal representation of the two-bit address signal. For example, if addr = b11, the output signal should be dout3. The circuit should also have an enable signal (din_en) that controls whether the input signal should be forwarded to an output or not. If an output is not currently being driven, it should be set to 0. Please provide Verilog code for the circuit design, including input and output signal declarations.
  • How can you design a Verilog circuit for routing an input to specific outputs based on a two-bit address and an enable signal?
  • How would you design a Verilog circuit with an input and four outputs, directed by a two-bit address and an enable signal?
  • Please draft a Verilog circuit design for routing an input signal to various outputs, determined by a two-bit address and an enable command.
  • Please provide a Verilog design for a routing circuit with multiple outputs and an enable signal, based on a two-bit input address.
  • Please provide a Verilog schematic for a multi-output routing circuit with an input signal, address control, and enable feature.

Interview question asked to Design Verification Engineers interviewing at Taiwan Semiconductor, Hewlett Packard, Oppo and others: Could you design a Verilog-based router circuit with an input signal and multiple outputs, controlled by a two-bit address signal?.